10 Best Atb Table Saw Blades Of 2026
Atb Table Saw Blades — Reviews, Recommendations & Updated Buying Guide September 2026
OA-BRES 10-Inch Miter/Table Saw
おすすめの理由
CMT 273.250.80M ITK Plus FINE
おすすめの理由
OA-BRES 12-Inch Miter/Table Saw
おすすめの理由
TOMAX 7-1/4-Inch 60 Tooth ATB
おすすめの理由
10 Inch Miter/Table Saw Blade
おすすめの理由
5-1/2 Inch Miter/Table Saw Blades
おすすめの理由
Freud LU87R009: 9" Thin Kerf Rip
おすすめの理由
COMOWARE 7-1/4“ Circular Saw Blade
おすすめの理由
Diablo Freud D0724X 7-1/4-Inch 24
おすすめの理由
クイックピック
10 Best Atb Table Saw Blades Of 2026
クイックピック
OA-BRES 10-Inch Miter/Table Saw Blades, 80-Tooth ATB TCT Fine Finish Wood Cutting Circular Saw Blade with 5/8 Inch Arbor
CMT 273.250.80M ITK Plus FINE Finish Saw Blade HW 250X2.4X30 Z=80 ATB+S
OA-BRES 12-Inch Miter/Table Saw Blades, 100-Tooth ATB TCT Ultra Fine Finish Wood Cutting Circular Saw Blade with 1-Inch Arbor
TOMAX 7-1/4-Inch 60 Tooth ATB Finishing Saw Blade with 5/8-Inch DMK Arbor
10 Inch Miter/Table Saw Blade, 80 Teeth ATB TCT Fine Finish Wood Cutting Circular Saw Blade with 1 Inch Arbor
5-1/2 Inch Miter/Table Saw Blades 2pcs, 24T+48T ATB TCT Fine Finish Wood Cutting Circular Saw Blade with 5/8 Inch Arbor
Freud LU87R009: 9" Thin Kerf Rip Blade
COMOWARE 7-1/4“ Circular Saw Blade, 140T Table Saw Blade, 5/8" Arbor, ATB Circular Saw Blade, Anti-Vibration, Teflon Anti-Stick, Miter Saws Blades for Wood, Laminate, Plywood & Hardwoods
Diablo Freud D0724X 7-1/4-Inch 24 Tooth ATB Carbide Framing Saw Blade with 5/8-Inch and Diamond Knockout Arbor
10 Inch Table Saw Blade with 60T ATB Anti Kickback Tooth for Wood and 5/8-Inch Arbor
購入ガイド: Atb Table Saw Blades
📋 目次
1What tooth count is best for different cutting tasks with ATB table saw blades?
For general ripping, 40-60 teeth provide a balance of speed and finish. For finer cuts or crosscutting, 80+ teeth offer smoother results but slower feed rates. Fewer teeth mean faster cuts but rougher edges, while more teeth improve cut quality at the expense of speed.
2How does the hook angle affect performance in ATB blades?
A lower hook angle (0°-5°) reduces tear-out and is ideal for crosscutting or cutting veneer. A higher hook angle (10°-15°) increases cutting aggressiveness, making it better for ripping thick stock. Choose based on your material and desired finish quality.
3What material should I look for in ATB table saw blades?
High-carbon steel is common and offers good durability for general use. Carbide-tipped blades provide longer life and better performance on harder materials like MDF or laminate. Carbide is more expensive but worth it for frequent or heavy use.
4What blade thickness and arbor size are standard for ATB table saws?
Most ATB blades use a 1/4-inch arbor, though some larger blades use 5/8-inch. Blade thickness typically ranges from 0.090 to 0.125 inches, with thinner blades offering less vibration and better cut quality for fine work.
5Are there any common mistakes to avoid when selecting ATB table saw blades?
Avoid blades with too few teeth for fine cuts or too many for rough stock, as this can cause overheating or poor performance. Also, ensure the blade is compatible with your saw’s arbor size and that the kerf matches your table saw’s throat plate opening for proper alignment.
選び方について
編集者は製品を試し、それについて書くことを心から愛するメンバーです。各製品の実際の使いやすさと強みを比較し、最も重要な点を独自の「おすすめの理由」にまとめています。購入前に、大切なポイントがひと目でわかります。