10 Best 80 Tooth Table Saw Blades Of 2026
80 Tooth Table Saw Blades — Reviews, Recommendations & Updated Buying Guide September 2026
OA-BRES 10-Inch Miter/Table Saw
おすすめの理由
FOXBC 10-Inch Miter/Table Saw
おすすめの理由
IRWIN Marples 10-Inch Circular Saw
おすすめの理由
IRWIN Tools Steel Table/Miter
おすすめの理由
WEN BL1080 10-Inch 80-Tooth
おすすめの理由
12-Inch 80-Tooth Miter/Table Saw
おすすめの理由
FOXBC 10-Inch Table Saw Blade
おすすめの理由
クイックピック
10 Best 80 Tooth Table Saw Blades Of 2026
クイックピック
OA-BRES 10-Inch Miter/Table Saw Blades, 80-Tooth ATB TCT Fine Finish Wood Cutting Circular Saw Blade with 5/8 Inch Arbor
FOXBC 10-Inch Miter/Table Saw Blade, 80-Tooth, Aluminum and Non-Ferrous Metal & Plastic Cutting with 5/8-Inch Arbor
IRWIN Marples 10-Inch Circular Saw Blade, Hi-Alternate Tooth Bevel, 80-Tooth (1807370)
10 Inch Miter/Table Saw Blade, 80 Teeth ATB TCT Fine Finish Wood Cutting Circular Saw Blade with 1 Inch Arbor
10" Miter/Table Saw Blade, 80 Teeth ATB Tungsten Carbide Saw Blades with 5/8" Arbor for Wood, Aluminum, PVC Pipe and Plastic Cutting
IRWIN Tools Steel Table/Miter Circular Saw Blade, 10-Inch, 80 Tooth (11270ZR)
Freud 10 In 80 Tooth Plexiglass&Plastic Cutting Saw Blade 5/8 In Arbor LU94M010
WEN BL1080 10-Inch 80-Tooth Carbide-Tipped Ultra-Fine Finish Professional Woodworking Saw Blade for Miter Saws and Table Saws
12-Inch 80-Tooth Miter/Table Saw Blades TCT Fine-Finish Professional Woodworking Saw Blade for Miter Saws and Table Saws with 1-Inch Arbor
FOXBC 10-Inch Table Saw Blade, 80-Tooth, Ultra Finish Wood Cutting, 5/8-Inch Arbor
購入ガイド: 80 Tooth Table Saw Blades
📋 目次
1What is the ideal thickness for an 80-tooth table saw blade?
An 80-tooth blade is typically used for fine cuts and smooth finishes, so look for a blade thickness between 0.093 and 0.125 inches. Thinner blades offer less vibration and better cut quality, while thicker blades provide more rigidity for larger stock or less precise setups.
2What material should I choose for an 80-tooth blade?
High-speed steel (HSS) is common for general use, while carbide-tipped blades offer longer life and better performance on harder materials. For frequent use or cutting hardwoods, opt for carbide-tipped blades with at least 10 teeth per inch (TPI) for a clean, smooth cut.
3How does the number of teeth affect the cut quality of an 80-tooth blade?
An 80-tooth blade has a high tooth count, which reduces chip size and produces a finer, smoother cut. This makes it ideal for thin stock, veneer, or finish work. However, it may not be as efficient for rough cuts or thick material compared to blades with fewer teeth.
4What arbor size should I look for in an 80-tooth blade?
Most table saws use a 5/8-inch arbor, so ensure the blade is compatible with that size. Some blades come with a 1-inch arbor for larger, more powerful saws. Always check your saw’s manual to confirm the correct arbor size for your machine.
5Are there any common mistakes to avoid when using an 80-tooth blade?
Avoid using an 80-tooth blade for rough cuts or thick stock, as it can cause overheating and dulling. Also, ensure the blade is properly aligned and the table saw’s fence is square to prevent binding or kickback. Always use a push stick for safety when cutting small or thin pieces.
選び方について
編集者は製品を試し、それについて書くことを心から愛するメンバーです。各製品の実際の使いやすさと強みを比較し、最も重要な点を独自の「おすすめの理由」にまとめています。購入前に、大切なポイントがひと目でわかります。